Flagship Model
.jpg)
Welding Electrode Packaging
Automatic Welding Electrode Rod Packaging System
Seamlessy integrated system originally designed by our company that operates on full automatic mode, with spectacular features that aid in packing to perfection.
Product Details
Comprehensive specifications and capabilities
Q: What are the annual maintenance requirements and estimated costs for the column palletizer?
Q: Can a single column palletizer handle both flat cartons and irregular heavy woven bags?
Q: How long does the installation and commissioning process take?
Q: What utility requirements are needed to deploy the moveable palletizer at a new station?
Q: What is the standard warranty period for the collaborative palletizer?
Q: What is the actual required floor space for the 30kg collaborative palletizer?
Q1: What is your standard lead time for palletizers?
Q2: Can the machine be customized for my specific products, such as different bucket or gripper sizes?
Q3: What export and shipping documents do you provide?
Q4: How do I place an order?
Q5: Do you provide installation, training, and after-sales support?
Q6: What is your warranty policy?
Q7: What industries do your palletizers typically serve?
Q8: Can your machines integrate with my existing production line?
Q9: What are the key advantages of choosing your palletizers over competitors?
Q10: Do you provide case studies or customer references?
Electrode Cartoner - Weight Scaling Form-Fill-Seal Packaging Machine
| Form-fill-seal scaling cartoner | Parameter |
| Model | HW-HT-XH01A |
| Capacity | ≥12 boxes/min (depending on the weight) |
| Accuracy | 99.7% |
| Size | L 200-350 W 40-100 H 40-100 mm (wraparound type) |
| Box quality | 120-250 g/m³ |
| Welding Electrode | dia. 0.8 mm |
| Frequency | 22 kW |
| Power supply | 380V±10% 50Hz 3 PH |
| Air supply | ≥0.6 MPa |
| Air consumption | 1400 L/min |
| Machine size | L4750×W1950×2680 mm |
| Weight | 2200 kg |
Shrink Wrapper
Energy saving machine for fully automatic shrink wrapping of trays with speed up to 15 cartons/minute (for carton of electrode, 5x1 configuration). The cartons arrive in a single lane and are indicated and separated from eventual queue before the film wrapping. The shrink film is wrapped around the pack, top support activated and the film is welded and cut off before transfer to the shrink tunnel. The heat shrinks the film so tight pack is achieved before pack is fed out.
Machine Configuration Of:
- 1. Heavy duty construction in painted steel frame. Designed for easy access and minimum maintenance.
- 2. Infeed conveyor with adjustable guide rails and product indication and speed separation of products via frequency controlled belt conveyors.
- 3. The angled welding frame restricts the film usage to a minimum in that the sealing takes place close to the packaging, which ensures low film costs.
- 4. Thermistor controlled laminate jaw and top jaw with pneumatically operated cutting blade, which does not release welding fumes.
- 5. The bottom haw is retractable and prevents dirt and film waste sticking, which increases operational reliability. Top support over welding position.
- 6. Cooling fan at the end of shrink tunnel. Motor driven film feed system with automatic control of the feed speed.
- 7. Ensures high operating reliability and is insensitive to static electricity Shrink tunnel rated at 25 kW of thermostatically controlled, shrink tunnel length 2000 mm.
- 8. Film thickness: (0.07 mm)
- 9. Film width: 460 mm (depending on the products)
- 10. Pack weight: maximum 20 kg
- 11. Complete electric installation consisting of one painted steel electric panel board complete with electronics, pneumatics and electrics system.
- 12. External wiring in fireproof cable and low voltage secondary circuits.
- 13. The electrical control panel complies with all relevant EU regulations and it is in accordance to the most rigorous accident prevention norms.
Case Packer
- 1. The machine has a gravity magazine where the operator loads the blanks, with no stoppage necessary to refill the magazine.
- 2. Case blank is taken by vacuum suction cups from the magazine pick position and is operated so that it is retained by the conveyor flights.
Once the case has been erected, the flighted conveyor indexes through to the load station. - 3. There is a product preparation area in front of the loading station where the formated products in the correct collation to be loaded.
- 4. The side load cylinder pushes the product group into the open case, When a sensor detects that the pusher plate has been withdrawn the flighted conveyor indexes to the next position.
- 5. The loaded case has its flaps folded and glued.
- 6. The next case is withdrawn from the magazine and the previously glued case is moved into the loading position, so that the sequence may be repeated.
Strapping Machine
| Power source | 220V 50/60Hz 1PH 0.6kw 4A |
| Packing speed | ≤ 55 strap per minutes |
| Tension range | 0-45 kg |
| Hot adhering position | Bottom |
| Working table height | 850 mm |
| Arch |
1. standard size: width 500 x length 400mm (inner size) (arch size can be customized) |
| Applicable PP strap | 5 mm, 6 mm, thickness (0.5-0.8) mm |
| Applicable strap spool | inner dia: 200 mm-210 mm, outer dia: 400 mm-450 mm, width 170 mm-190 mm |
| Packing type | parallel strapping, manual packing, foot switch |
| Electrical configuration |
P.C Board control; |
| Machine size | L830 x W705 x H1370mm |
| Shipping size | L900xW850xH1510mm |
| Weight | N.W 170 kg, G.W 210 kg |
| Noise | ≤ 75 dB |
| Environment condition | humidity ≤95%, temperature 0-40 ºC |
| Adhesion | surface ≥90%, width ≥20%, deviation of position ≤ 2 mm |
Check Weight
| Model | HW-CZ-30 |
| Range | 50g-30kg |
| Speed | 5-50 m/min |
| Capacity | 10-12 Boxes/min |
| Accuracy | ±30 g |
| Frequency | 200 W |
| Power Supply | 220V 50HZ 1 PH |
| Machine Weight | 260 kg |
Robotic Palletizer
| Model | KR120-3299PA KUKA |
| Movement radius | 3195 mm |
| Working space | 77.9 cubic meters |
| Load | 120 kg |
| Number of motion axes | 5 |
| Installation location | ground |
| Repositioning | ±0.06 mm |
| Controller | KRC4 |
| Weight | 1093 kg |
| Motion parameters of each axis | Axis 1: ±185° 105°/s; Axis Axis 2: -5º/-40º 107°/s; Axis Axis 3: +155º/0º 114°/s |
Pallet Stretch Wrapper
| Model | HW-1800PL+FM1300 |
| Machine size | L2500* W1800* H2250mm |
| Turntable diameter | 2000 mm Ø |
| Wrapping height | 2100 mm |
| Pallet weight | 2000 kg |
| Power supply | Single phase or 3 phase 220V/380V/415V/440V |
| Power consumption | 3.75 kW |
| Turntable speed | 15 RPM Adjustable |
| Capacity | 35-40 pallet/hour |
| Consume air pressure | 15 NL/min |
| Film Width | 500 m/m, 750 m/m (option) |
| Film land | 20-35 microns |
| Film outside diameter | 350 mm below |
| Film inside diameter | 76 mm |
| Conveyor high | Min. 630 m/m |
| Conveyor speed | 8M/min |
| Machine weight | 1900 kgs |
| Cutting film | Electric heating or knife (option) |
Request a Quote
Get a customized quote for your WEX-5000 system with detailed pricing and specifications